**NOTE: THIS PRICING IS FOR THE BASE KIT ONLY. ANY ADDITIONAL OPTIONS OR ONSITE INSTALLATION ARE EXTRA.

This Pre-Built Siemens 828D CNC Kit is for a 3-axes bed mill machine. Kit components include: Siemens CNC Display/Control (271.4PPU), Machine Control Panel (483MCP),(3) Siemens Drives & Servo Motors with cable sets, enclosures, control components, (1) power supply, control transformer, output and safety relays, lockable rotary disconnect, resettable breakers for circuit protection, and multi-cable thru gland. Servo motors are rated for 6Nm. One motor comes with a brake, which is typically used for the Y-Axis on a horizontal machine, or Z-Axis on a vertical machine. MTP Starter Prints, PLC Code, and MTP Commissioning Manual also come with this kit.

Our CNC Kits are some of the easiest to install and configure in the industry. Mount the unit, set a few parameters, and you are ready to go. Setup time typically takes 2-3 hours after hardware is mounted on the machine. PLC code is pre-written and will work for most basic milling machine applications. We have also included a specific User POU, where additional PLC code can be written for machine specific applications, like a tool changer (starter code optional). If you are not proficient in ladder, or simply don't have the time to commission the system for your specific application, ask about our Integration Services. We are happy to setup the machine ourselves or recommend one of our trusted Integration Partners.

For more information download the Siemens 828D Bed Mill CNC Kit Brochure.

Included in Kit

• Newest Siemens 828 PPU with MCP

• Pre-Built Electric Enclosure (Default Paint is Grey) (OEM is Black)

• S120 Drives & 1FK7 Motors on Digital Drive Bus

• (3) 6Nm Servo Motors

• Wireless Hand Pulse Generator

• 10 Meter Power and Feedback Cables

• MTP Source Code

• 72in/48out IO Board

Feature Overview

• ShopMill Conversational Programming

• Absolute Encoders - NO Homing Required

• DXF Reader (DXF PC Software Available Free As Well)

• 3D Part Simulation

• Dedicated Jog + Rapid Rate Keys (X, Y, Z)

• Up to 600ipm Rapid Feedrate (Dependent on screw pitch/ratios)

• Software Travel Limits

• Feedrate/Spindle Speed Overrides

• Collision Avoidance ECO & Cogging Torque/Nodding Compensations

• Custom Machine Hotkeys such as:

o Tool Change (Z Retract)

o Tool Carousel CW/CCW, HOME, OFF

o Work Light

o Coolant On

o Spindle CW/CCW

o G54 – G59 Work Offset Activation Keys

o Specific Cycle Start Keys

 Get Fast & Easy Financing

 Get instant funding with low monthly payments