Servo Power Feed, 150 lbs. Torque, Milling Table "X" Feed - M-200-150 (Replaced by New 350X Model)
$971.00
$963.00
- SKU:
- GSP-M-200-150
Ships From Mfr.
Description
-Semi-automated machining on Class 1 mills to 3 hp
-Peak torque (full-wave SCR control compound DC motor): to 150 in-lb / 17 N×m torque
-Intermittent torque: 120 in-lb / 13.6 N×m
-Continuous torque: 100 in-lb / 11.3 N×m
-Variable feed rate: .50-35 ipm / 13-889 mm/min.
-Rapid traverse: 35 ipm / 889 mm/min.
-Gear reduction ratio (motor to screw shaft): 72:1
-Smooth surface finish at speeds as low as 0.5 ipm or 13 mm/min. at full torque.
-Superior speed regulation, ramping, dynamic breaking, friction safety clutch and limiting circuit protection.
-Helical gearing and torque limiting friction safety clutch.
-Electrical: 110V, 50/60 Hz, 3 Amps.
-Approximate weight: 15 lb. / 6.8 kg.
Reviews
Additional Info
Description
NOTE: As of 3/31, the Servo 140, 150, and 200 models have been discontinued and replaced by the new 350X model.
Please RFQ or shop the new 350X model HERE.
GO HERE to shop all models of Servo 150 Power Feeds
If you don't see the correct model for your machine please call 317-662-0185 or Request a Quote
Powerfeed comes with everything you will need to mount the unit to your machine (bracket and brass gear included). This is only for Bridgeport (Hand Feed), Brute 9x42,9x49, Jet 1048VS, Manford, Select 1VBVS, South Bend Import, Summit EVS-350 Mills.
Type 150 - Table Feeds
-The type 150 is a full-sine wave control that gives better control and dynamic breaking. This is best seen in the superior finishes given at slow feed rates
-Semi-automated machining on Class 1 mills to 3 hp
-Peak torque (full-wave SCR control compound DC motor): to 150 in-lb / 17 N×m torque
-Intermittent torque: 120 in-lb / 13.6 N×m
-Continuous torque: 100 in-lb / 11.3 N×m
-Variable feed rate: .50-35 ipm / 13-889 mm/min.
-Rapid traverse: 35 ipm / 889 mm/min.
-Gear reduction ratio (motor to screw shaft): 72:1
-Smooth surface finish at speeds as low as 0.5 ipm or 13 mm/min. at full torque.
-Superior speed regulation, ramping, dynamic breaking, friction safety clutch and limiting circuit protection.
-Helical gearing and torque limiting friction safety clutch.
-Electrical: 110V, 50/60 Hz, 3 Amps.
-Approximate weight: 15 lb. / 6.8 kg.
NOTE: Servo Products Company has made every effort to provide mounting hardware kits that are as accurate and complete as possible for each machine model. However, machine builders may change their designs without letting us know. Therefore, some kits may not fit properly. Please let us know when this happens.
Reviews (0)
Be the first to review this product.
Additional Info
- SKU:
- GSP-M-200-150
- Availability:
- Ships From Mfr.
- Shipping:
- $20.00 (Fixed Shipping Cost)
- Model:
- 150
