Newall SHG-VS Incremental Encoder
Request Quote for Pricing
- SKU:
- NEWLSHGVS
Call for Lead Time
Description
Reviews
Additional Info
Description
The SHG-VS linear encoder is intended for use with the SCC-200 module. The SCC-200 will output a ~1Vpp sine/cosine signal with a single reference marker. The encoder has a series of four selectable reference markers spaced every 25.4mm. The reference selected for the output reference is dependent on the rotational alignment of the scale relative to the reader head upon installation.
Note: Prices include scale, reader head, scale support brackets, SCC-200 Module (P/N 600-82875). *Contact us for travels not shown or greater than 520”.
Additional Options
The Newall Advantage
- IP67 rating (NEMA 6)
- Withstands dust, dirt, oil and other harsh environmental conditions
- No mechanical wear characteristics
- Requires no cleaning or maintenance
- High tolerance to shock and vibration
- High reliability
Quick and Easy Installation
The design of these linear encoders allow installment in almost any position, unlike glass-scale linear encoders, which usually need to be installed with the lip seal facing downwards to prevent contamination. Self-aligning fixing brackets allow virtually effortless scale mounting, needing only a single hole for each set of brackets.
Download Documentation
- SCC-200 Datasheet
- Dimensional Drawing (<100" travel)
- Dimensional Drawing (≥100" travel)
- Installation Manual
- Newall Linear Encoder Catalog
Specifications
| Output Signal | ~1Vpp sinusoidal from SCC-200 converter |
| Accuracy/Meter | ±0.0004" (±10µm) |
| Resolution from the SCC-200 | 20µm signal period |
| Scale Travels | 2" to 520" (51mm to 11.73m) Travels over 520" available |
| Scale Diameter | 0.601" (15.25mm) |
| Reader Head Dimensions | 2.05"H x 5.16"L x 1.10"D (52mm x 131mm x 28mm) |
| Reference Marker | Single (select 1 of 4) |
| Power Supply | 5VDC ±5%, |
| Shock (11ms) | 100g (IEC 69-2-6) |
| Vibration (55-2000Hz) | 30g (IEC 68-2-27) |
| Sample Period | 100µs |
| Environmental Rating | IP67, fully submersible (IEC 529) - Exceeds NEMA 6 |
| Operating Temperature | 32° to 131°F (0° to 55°C) |
| Coefficient of Expansion | 12 x 10-6K |
| Scale Material | 316 stainless steel |
| Overall Scale Length | Scale travel length + 10.2" (258mm) |
| Standard Cable | 11.5' (3.5m) armored |
| Maximum Cable Length | 72.2' (22m) |
| Standard Connector | 15 pin ‘D’ style |
| EMC Compliance | BS EN 50081-2 and BS EN 61000-6-2 |
Reviews (0)
Be the first to review this product.
Additional Info
- Warranty:
- <ul style="list-style: none; margin-left: 5px;"> <li><a href="http://machinetoolproducts.com/content/Newall/Linear%20Encoders/scc200%20datasheet%20023-80750-1.pdf" target="_blank">SCC-200 Datasheet</a></li> <li><a href="http://machinetoolproducts.com/content/Newall/Linear%20Encoders/316-87290-0%20-%20dimensional%20drawing%20for%20shg%20incremental%20encoders%20less%20than%20100%20inch.pdf" target="_blank">Dimensional Drawing (<100" travel)</a></li> <li><a href="http://machinetoolproducts.com/content/Newall/Linear%20Encoders/316-87295-0%20-%20dimensional%20drawing%20for%20shg%20incremental%20encoders%20100%20inch%20and%20larger.pdf" target="_blank">Dimensional Drawing (≥100" travel)</a></li> <li><a href="http://machinetoolproducts.com/content/Newall/Linear%20Encoders/shg%20%26%20mhg%20incremental%20encoder%20installation%20manual%20-%20023-82100-uk-0%20.pdf" target="_blank">Installation Manual</a></li> <li><a href="http://machinetoolproducts.com/content/Newall/Linear%20Encoders/led%20-%20linear%20encoder%20catalog%20-%20023-80740-uk-1.pdf" target="_blank">Newall Linear Encoder Catalog</a></li> </ul>
- SKU:
- NEWLSHGVS
- Availability:
- Call for Lead Time
- Model:
- SHG-VS
