Linear encoders from HEIDENHAIN for numerically controlled machine tools can be used nearly everywhere. They are ideal for machines and other equipment whose feed axes are in a servo loop, such as milling machines, machining centers, boring machines, lathes and grinding machines. The beneficial dynamic behavior of linear encoders, their high permissible traversing speed, and their acceleration in the direction of measurement predestine them for use on highly-dynamic conventional axes as well as on direct drives.
Linear encoders with full-size scale housing are characterized by their sturdy construction, high resistance to vibration and large measuring lengths. As a connection between the scanning carriage and the mounting block, they have an “oblique web,” which permits vertical and horizontal mounting with the same degree of protection.
|Specifications||LB 382 (single-section)|
|Measuring Standard (Coefficient of Linear Expansion)||Rustproof steel scale tape with AURODUR graduation, grating period 40 µm αtherm ≈ 10e-6 K^-1|
|Accuracy grade*||±5 µm|
|Measuring length ML* (mm)||
440, 640, 840, 1040, 1240, 1440, 1640, 1840, 2040, 2240, 2440, 2640, 2840, 3040
|Reference Marks||Selectable with magnets every 50 mm; One mark at midpoint of measuring length|
|Cutoff Frequency -3 dB||≥ 250 kHz|
|Electrical Connection||Separate adapter cable (1 m/3 m/6 m/9 m) connectable on mounting block|
|Cable Length||≤ 100m|
|Voltage Supply without Load||DC 5 V ±0.25 V/ < 150 mA|
|Traversing Speed||≤ 120 m/min|
|Required Moving Force||≤ 15 N|
|Vibration 55 Hz to 2000 Hz||≤ 300 m/s² (EN 60 068-2-6)|
|Shock 11 ms; Acceleration||≤ 300 m/s² (EN 60 068-2-27)|
|Operating temperature||0°C to 50°C|
|Protection EN 60 5293)||IP 53 when installed according to instructions in the brochure, IP 64 with sealing air from DA 400|
|Mass||Encoder: 1.3 kg + 3.6 kg/m measuring length|
Be the first to review this product.
- <p><a href="http://machinetoolproducts.com/content/Heidenhain/Linear_Encoders_For_Numerically_Controlled_Machine_Tools.pdf" target="_blank">Linear Encoders Brochure</a></p> <p><a href="http://machinetoolproducts.com/content/Heidenhain/Interfaces.pdf" target="_blank">Linear Encoder Interfaces Brochure</a></p>
- 1 Vpp