Our largest NC hydraulic press brake weighs 8,800 lbs. with a rigid steel frame. The encoder-controlled stroke and back gauge system offers 2 DROs and takes just 5 minutes to learn.

*Delivers up to 90 tons of pressure.
*Bends sheet metal up to 78” wide.
*10 hp main motor runs on 220-volt 3-phase power.

Powerful, Easy-to-Use Hydraulic System

*Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
*2 encoder-controlled hydraulic cylinders move the top beam.
*Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
*It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
*You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend won't lose its shape.
*2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
*Foot pedal brings the stroke up and down, leaving your hands free to position the material.
*Motorized back gauge rides on a solid ball screw trolley mechanism.
*Back gauge encoder shows its position on its own DRO.
*Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.

Rigid Structure and Low Maintenance

*Heavy electrowelded frame, made of solid steel, enables this press brake to stay accurate and run smoothly in production for many years.
*Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
*Includes a set of hardened single-Vee American tooling.
*Accepts standard press brake tooling, giving you a wide variety of options.
*Comes with front material rests (or support arms), which some competing machines do not include.
*6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
*4 grease zerks let you add oil every few months.
*Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.

Fast Shipping and Lifetime Service

*Typically in stock and usually ships in 72 hours.
*Most replacement parts are in stock at our Wisconsin headquarters, so we can get them to you without delay.
*Comes covered by a 1-year parts warranty.
*We provide lifetime technical support by phone. All of our reps have hands-on machine experience. Call us whenever you need help and advice on a project.

Recommended for: Industrial shops, maintenance shops, and R&D shops.

Features

Specifications